 ™ | |
Linear Power, Inc.
3455 Lanell Lane
Pearl, MS 39208 USA
(601) 932-8477
Fax: (601) 939-0265
|
Linear Power Products Modification Rates for 2006
Even the best amplifiers can perform and sound better with a little help. Here's what you can expect:
These modifications improve dynamics, channel separation, musical detail and information. You can also expect a greater
signal to noise ratio, better sound stage and image, smoother midrange, more natural overall sound, more headroom and
damping factor, softer clipping, extended low end response and more power output.
The power supply fets are changed to parts with double the current capability of the factory devices, the storage
capacitors are changed to parts with over double the storage and filtering than the stock components. The transformer's
current and voltage capabilities are also increased. The pre-amp and output stages are also refined and improved with
various additional parts and part changes to improve the overall sonic capability of the amp.
| DPS-200 / LP50 |
|
$135.00 |
| DPS-350 / LP100 |
|
$165.00 |
| DPS-500 / LP150 |
|
$195.00 |
| XO-3 Crossover |
|
$125.00 |
| 502HV / 5002 / 5002IQ / 3.2HV |
|
$175.00 |
| 2.2HV / 2502IQ / 2202 / 2202IQ / 1752 |
|
$150.00 |
| 1502IQ |
|
$150.00 |
| 952IQ / 992IQ |
|
$135.00 |
| 452 / 452IQ / 652 / 652IQ |
|
$125.00 |
| 2652 |
|
$125.00 |
| 4253IQ |
|
$135.00 |
| 4503IQ |
|
$155.00 |
Heatsink Refurbish*
(Stripping and Re-Coloring in Powder
Coating, covers most minor scratches
and dents, Stock and Custom Colors available) |
|
CALL |
Custom Mods
Built to suit a particular use will be quoted on each
unit, and may vary from normal modification rates. |
|
CALL |
| |
Additional models may be able to modified, rates are available upon request.
*Heatsink Refurbish takes approximately 4 to 6 weeks turn-around. Dents are straightened prior to Powder Coating. Pricing is according to size of heatsink.
|
Reliability or longevity of the product is not reduced by these modifications, in most cases it even
improves the reliability. These were the ONLY factory approved modifications in the industry. The factory warranty was
also extended to cover modified units during the time Linear Power was in operation.
These modifications DO NOT decrease the impedance capability of the amplifiers and the stock impedance loads MUST
still be observed!
Please note that no modifications are available for the "HV" line at this time. If, and when, such
modifications should become available, information will be found on this page.
If you need to send your Linear Power product in for modifications, PRINT OUT AND COMPLETE THIS FORM.
Carefully package the unit with the form and send it to:
Linear Power, Inc.
3455 Lanell Lane
Pearl, MS 39208 USA
Shipping and Insurance costs to send the unit to T.I.P.S. is the responsibility of the customer. It is
HIGHLY recommended that insurance for the full replacement value of your item be purchased from your shipper. T.I.P.S.
will NOT be responsible for items that never arrive or that are damaged in shipment due to poor packaging. Please
package your equipment well.
Shipments will be by UPS ground unless other wise requested, the customer is responsible for any shipping charges
above the UPS ground rate, this includes additional charges for foreign shipments or shipments to Alaska or Hawaii.
|
 |
 |
 |
 |
 |
 |
|
Payment can be made by major credit card over the phone, or electronically through Paypal. Other accepted forms of payment
are cashiers/bank check or money order, but you will have a postal delay. Personal or business checks are accepted but you
are subject to a possible 15-day delay in processing and clearing of the check once the check arrives to us.
|
© Linear Power, Inc. - ALL RIGHTS RESERVED LINEAR POWER is a trademark of Linear Power, Inc. Legal Information |