Model

RMS Power @ 4 Ohms Stereo 12.5 volts

THD 20-20KHZ

Mono Rating 4 Ohms **

Maximum / Peak Power

Damping Factor 4/2Ohm

Channel Separation

Slew Rate Volts/mSec

Signal To Noise Ratio

Required Fuse

2 Ohm St 4 Ohm Mono Capable

Internally Bridgeable

Frequency Response

3.2HV

25W x2 RMS

0.008%

875 Watts

2100 Watts

220/110

>70 dB

100 dB

60 Amps*

Yes

Yes

5Hz-250kHz

* The fuse must be a slow blow style fuse, the peak rating on each of these amps are much higher than the fuse rating. ** Mono Rating @ 4 Ohms is tested with the power supply taps moved to 2 Ohms setting where applicable.

Amplifier Dimensions
Model	Height	Width	Length
3.2HV	3.00"	9.50"	14.50"

© 2006 Linear Power, Inc. - ALL RIGHTS RESERVED
Linear Power is a licensed trademark.